Click image to view full size image
KA-RLH06-3 B22 Wireless 433.92 MHz RF Remote Control Lamp Holder specifications:
Working voltage: 120-240V
Frequency: 50/60Hz
Max. Load: 60W(incandescant lamp); 20W(engergy saving lamp)
Transmission frenquenc :y: 433.92MHz
Remote control distance: 30 meters(free area)
Transmitter: 1(one) pc 12V 23A battery
One remote controler can match 1/2/3/4/5 or more lamp sockets
Widely used for table lamp, bed lamp and ceiling lamp and so on
Function:
1.Lamp Holder can be used for home lighting (table lamp, ceiling lamp), garage, attic, etc. and to provide easily controlled lights anywhere in your home or office.
2.Easy to operate, safe.
3.Can pass through wall, glass but may be affected by Radio Waves.
Operation:
1. The transmitter has three buttons with numbers 1, 2 and 3. The three receivers also have a number
on each, "1" on receiver 1, "2" on receiver 2, "3" on receiver 3, So button 1 on the transmitter
controls receiver 1, button 2 controls receiver 2, button 3 controls receiver 3, no any interference.
2. It remains in the "OFF" mode after a power out, even when power comes on again.
KA-RLH06-3 Actual photos:
Working voltage: 120-240V
Frequency: 50/60Hz
Max. Load: 60W(incandescant lamp); 20W(engergy saving lamp)
Transmission frenquenc :y: 433.92MHz
Remote control distance: 30 meters(free area)
Transmitter: 1(one) pc 12V 23A battery
One remote controler can match 1/2/3/4/5 or more lamp sockets
Widely used for table lamp, bed lamp and ceiling lamp and so on
Function:
1.Lamp Holder can be used for home lighting (table lamp, ceiling lamp), garage, attic, etc. and to provide easily controlled lights anywhere in your home or office.
2.Easy to operate, safe.
3.Can pass through wall, glass but may be affected by Radio Waves.
Operation:
1. The transmitter has three buttons with numbers 1, 2 and 3. The three receivers also have a number
on each, "1" on receiver 1, "2" on receiver 2, "3" on receiver 3, So button 1 on the transmitter
controls receiver 1, button 2 controls receiver 2, button 3 controls receiver 3, no any interference.
2. It remains in the "OFF" mode after a power out, even when power comes on again.
KA-RLH06-3 Actual photos: